
expert air duct cleaning in Dallas for homes and businesses
Professional duct cleaning Dallas TX that clears the air you breathe
If your Dallas home smells musty or your allergies flare every time the AC kicks on, professional duct cleaning Dallas TX is the fix. We pull dust, pet hair, mold spores, and construction debris out of your ductwork with HEPA vacuum and rotary brush equipment. Our expert air duct cleaning in Dallas serves homeowners and businesses across Dallas County, and we can usually get to you same day.
What's included
What is included in every duct cleaning
Every full duct cleaning we sell includes the same core steps, whether it is a 1,200 square foot condo in Uptown or a 4,000 square foot house in Plano. Add-ons like coil cleaning and dryer vent cleaning are quoted separately, and we tell you upfront if we think you need them.
Duct camera inspection
We run a duct camera through the main trunk and several branch runs before we start. You see the footage on our screen. This tells us what we are dealing with, whether there is mold, pest debris, or a disconnected joint, and it sets the flat price.
Negative air machine setup
We connect a negative air machine to the main trunk so the entire duct system is under negative pressure during cleaning. That means dust and debris go into our HEPA vacuum, not into your living room. We also seal off the furnace or air handler.
Rotary brush and air whip agitation
Every branch run gets agitated with a rotary brush and air whip, working from the farthest vent back to the trunk. Compressed air nozzles reach corners the brush cannot. We match brush heads to duct material so we do not damage flexible duct liner.
HEPA vacuuming and sanitizing
Once debris is loose, the HEPA vacuum pulls it out of the system. We then fog the ductwork with an EPA-registered sanitizer to reduce mold spores and bacteria. If we found confirmed mold growth, we treat it before we seal anything.
Mastic sealing and filter replacement
We seal accessible duct leaks with mastic sealant, which stops air loss and keeps dust from being pulled in through gaps. Then we replace your filter with a standard pleated filter. If you want a HEPA filter, we will tell you whether your blower can handle the static pressure.
Service overview
What professional duct cleaning Dallas TX actually involves
Professional duct cleaning Dallas TX is a mechanical and vacuum-based service that removes accumulated dust, debris, and microbial growth from your supply and return ductwork. We connect a negative air machine to the main trunk line, then work each branch with a rotary brush, air whip, and compressed air nozzle to knock buildup loose. A HEPA vacuum captures everything at the source. Finally, we fog the system with an EPA-registered sanitizer and seal accessible leaks with mastic sealant. Most homes take two to four hours.
Dallas homes run their HVAC systems nine months a year, and that constant cycling pulls in North Texas dust, cedar pollen, and attic insulation fibers. If you have pets, the problem doubles. We see flexible duct runs in older Oak Cliff houses that have never been cleaned since installation. That is why so many Dallas homeowners search for professional duct cleaning near me Dallas TX after a bad allergy season. If your last cleaning was more than three years ago, it is time.
The service timeline
How our duct cleaning process works
The process flexes to the condition, but these checkpoints keep decisions clear.
Inspection and quote
We start with a duct camera inspection of your main trunk and a few branch runs. You see the footage on our screen. We count vents, note the duct material, and check for pest infestation or disconnected joints. Then we give you a flat price before any work begins. This takes 20 to 30 minutes.
System setup
We lay drop cloths, remove and bag your vent covers, and connect a negative air machine to the main trunk line. The machine pulls the whole system into negative pressure so nothing escapes into your living space. We also seal off the furnace or air handler so debris cannot enter the equipment.
Mechanical agitation
Our techs feed a rotary brush and air whip through each branch run, working from the farthest vent back to the trunk. Compressed air nozzles reach corners the brush cannot. On sheet metal duct we use different brush heads than on flexible duct so we do not tear the liner. This is the longest step, usually 60 to 90 minutes.
HEPA vacuuming and sanitizing
Once every run is agitated, the negative air machine and HEPA vacuum pull the loosened debris out of the system. We then fog the ductwork with an EPA-registered sanitizer to knock down mold spores and bacteria. If we found mold growth, we treat it before we seal anything.
Sealing and final walkthrough
We seal accessible duct leaks with mastic sealant, reinstall your vent covers, and replace the filter. Then we walk the house with you, show you before-and-after camera footage, and explain what to watch for. Total job time runs two to four hours for a typical Dallas home.
Tools & methods
Equipment and standards we use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Negative air machine
Pulls the entire duct system into negative pressure during cleaning so debris travels into our vacuum, not into your living space. We size the machine to your system volume.
HEPA vacuum
Captures fine dust, mold spores, and allergen particles down to 0.3 microns. This is the final filter in the process and the reason your air is cleaner after we leave.
Rotary brush and air whip
Mechanical agitation tools that knock caked dust and pet hair off duct walls. We match brush stiffness to duct material so flexible duct liner does not tear.
Duct camera
Lets us see inside the trunk and branch runs before and after cleaning. You see the footage on our screen, which is how we prove the work was done.
Compressed air nozzle
Reaches corners and joints the brush cannot touch. We use it after brushing to push remaining debris into the negative air stream.
Fogger
Applies EPA-registered sanitizer as a fine mist through the ductwork to reduce mold spores and bacteria after cleaning.
Use cases
When Dallas homeowners call us
These examples show how the service framework adapts rather than forcing every call through one repair.

Mold on liner in Preston Hollow
A slow attic leak in a Preston Hollow home left visible mold growth on about 15 feet of flexible duct liner. The musty smell was noticeable in the master bedroom every time the system ran, and the homeowner had already replaced the filter twice with no change. → We treated the surface mold with EPA-registered sanitizer, removed the affected debris, and replaced the saturated section of flexible duct. We sealed the joints with mastic and fixed the attic leak source. The musty odor was gone the same day.
Post-remodel dust in Oak Cliff
A 1950s Oak Cliff house finished a full kitchen and bathroom remodel. Drywall dust and construction debris had been pulled into the return every time the AC ran during the project. The homeowner was still finding white dust on furniture weeks after the work ended. → We cleaned the trunk, every branch run, and the air handler cabinet with a negative air machine and HEPA vacuum. Camera footage showed clean duct walls throughout. The white dust stopped appearing on surfaces within two days.
Problems we solve
Duct problems we fix in Dallas homes
Most Dallas duct problems show up as one of these four complaints. Each one has a cause we can find with a camera and fix in a single visit.
Dust puffing out of vents when the AC starts
We agitate each branch run with a rotary brush and air whip, then HEPA vacuum the loosened debris out of the system. We also check your filter size and MERV rating to make sure the return is actually filtering what it should.
Musty smell every time the system runs
We clean the coil with coil cleaner, fog the ductwork with an EPA-registered sanitizer, and remove any debris feeding the growth. If the liner is saturated, we tell you which section needs replacement instead of cleaning over it.
Allergy symptoms that get worse indoors
Our expert air duct cleaning Dallas service removes the debris that feeds indoor allergens. We also check filtration and recommend a HEPA filter or whole-home media cabinet if your system can handle the static pressure. Most customers notice a difference within a week.
High energy bills with no obvious cause
We clean the ductwork, seal accessible leaks with mastic sealant, and clean the evaporator coil. That restores airflow and reduces static pressure. Dallas homeowners typically see the difference on their next summer electric bill.
Pricing process
What duct cleaning costs in Dallas
$350 - $900 for most residential jobs; commercial quoted per ton
Number of vents and systems
A single-system home with 10 vents takes less time than a two-story house with 20 vents and two air handlers. Each additional system adds roughly $150 to $250 to the job because we set up containment and clean a second trunk line.
Duct material and access
Sheet metal duct in a crawlspace is straightforward. Flexible duct in a 140-degree attic takes longer because we work carefully to avoid tearing the liner. Difficult access, like a sealed attic or a low crawlspace, adds labor time.
Mold or pest contamination
Confirmed mold growth or pest infestation adds a treatment step. We fog with EPA-registered sanitizer and may need to replace saturated duct sections. Pest damage often means sealing chewed flexible duct before we clean.
How much does professional duct cleaning cost in Dallas TX?
Most Dallas homes run $350 to $700 for a standard single-system house with 10 to 15 vents. Larger homes, two systems, or heavy mold growth push the range to $900 or more. Commercial rooftop units are quoted per ton. We give you a flat price after the camera inspection, so you know the number before we start.
What does professional duct cleaning include in Dallas?
Our standard service includes a duct camera inspection, negative air machine setup, rotary brush and air whip agitation of every branch run, HEPA vacuuming, sanitizer fogging, mastic sealing of accessible leaks, and a new filter. Coil cleaning and dryer vent cleaning are add-ons. You get before-and-after footage and a written summary of what we found.
How often should professional duct cleaning be done in Dallas Texas?
Every two to three years for most Dallas homes. If you have pets, allergies, or you just finished a remodel, do it every 12 to 18 months. Homes with flexible duct in attics collect dust faster because the liner traps debris. If you see dust puffing from a vent when the AC starts, that is your signal.
Does professional duct cleaning remove mold in Dallas?
Yes, if the mold is surface growth on duct walls or the coil. We treat it with an EPA-registered sanitizer and physically remove the affected debris. If the mold has penetrated the duct liner or the insulation is saturated, that section of duct needs replacement, and we will tell you straight. We are IICRC-certified for mold remediation.
Ready when you are
Book professional duct cleaning Dallas TX today
We are licensed, insured, and we show you camera footage before and after. Call (855) 947-6462 and we will give you a flat price over the phone or schedule a same-day inspection. Most Dallas jobs are booked within 24 hours.

Talk with the local team
Request Professional Duct Cleaning
Call (855) 947-6462 any time, day or night, and a real person picks up. We answer questions, give ballpark pricing over the phone, and book your inspection window on the spot. Most Dallas jobs get a same-day or next-day slot, and we text you the tech's name before arrival.



